HOME    Flame Retardants    Textile Flame Retardants    Hopeflam CP

Hopeflam CP

Specification:

 

Item

Standard

Appearance

colorless to light yellow liquid

Solid content (%)

80

PH Value

5.0-7.0

Viscosity (cp•s)

500-700

Density (25 deg.C)

1.25-1.35

Free formaldehyde (%)

<1.5

 

 

Properties and Features

  1. Excellent effect of using in cotton textile.
  2. Good durability of washing, keep good effect after more than 30 times of washing. 3.Less effect refer to color of textile and color fastness.

 

Suitable Scope

Suitable for various Cotton fabric.

 

Introduction of Usage

Application of formulation

Hopeflam CP 300-450g/L

Resin DMDHEU dimethylol dihydroxy-ethylene urea  40-55g/L Phosphoric acid85%)(pH3-4  10-25g/L

Softening Agent FSA 20-40g/L

Penetrating agent JFC                                                                         0-2g/L

 

Technological process

Liquid distribution——Padding one timeor Padding two timespick-up 70-80%——Pre drying105℃)——Baking165~170×2~3min——Alkali washing——Water washing

——drying.

 

 

Attention

  1. It will affect Flame retardancy and durability of washing if lower temperature or shorter time while baking.

  2. It will affect the strength if over Qty of phosphoric acid, and will affect Flame retardancy and durability of washing if lower Qty of phosphoric acid. So it will be strict to use phosphoric acid.

Due to affection to the strength of textile, it should confirm the strength of textile at first. 3.After baking, the textile should be Alkali washed Sodium carbonate 20g/L×40×20min,water washed until to Neutral. To avoid the affection of strength and flame retardancy of textile.

 

Package and Stock

1250kg IBC or 250kg/125kg PE Drum, or by request. Keep in cool and dry place.

 

Attention

  1. The introduction of product is only for reference. Please contact us if you have any question refer to technology and usage.
  2. The technology suggestions in both oral and words are from our kindness and honesty. User will be responsible to test our product to check and confirm whether it suitable for the process and application.

Refer to how to use the product, the process condition is not controlled by us, anything refer to usage should be up to users themselves.