Hopebright PF
- Textile optical brightening agent.
- Hopebright PF has a good whitening effect, mainly used for whitening of cotton, T/C，high whiteness lift, bright color, can achieve the special effect of white.
Key Features and Typical Benefits:
With excellent whiteness, pure and bright color, high temperature stereotyped and less yellow
Excellent acid resistance, alkali resistance, hard water resistance and electrolyte resistance
Excellent stability in the range of pH 2-11, and can be treated in the same bath with resin
The foam is very low and has good water solubility.
Properties:
| Property | Value |
| Physical Form | Solid |
| Appearance | Yellow green powder |
| Water Content (%) | ≤5.0 |
Application:
Hopebright PF is a powdery product. Before dilute, make it to paste form by adding 1 part of PF and 2 parts of cold water, then add hot water at 70-80℃ by 50 times of the diluted paste, stir and filter evenly, ready for use. It is suitable for over-flow machine,
jigger, etc.
1. Exhaustion whitening process:
Dosage: 0.05-0.5% (o.w.f)
Anhydrous sodium sulfate: 0-15 g/L
Temperature: 80-100℃
Time: 20-40 mins
2. Pretreatment and whitening in one bath:
Dosage: 0.05-0.5%(o.w.f)
Scouring agent: 0.3-0.5 g/L
NaOH: 2-5% (o.w.f)
H 2 O 2 (100%): 2-3 %(o.w.f)
Hydrogen peroxide stabilizer: 0.2 %(o.w.f)
Temperature: 95-100℃
Time: 40-60 min
Note: Actual process should be adjusted according to preliminary tries.
Operating and safety instructions:
1. Suggest weighing and diluting separately when preparing the solution.
2. Strongly recommend using soft water in dilution, if soft water is not available, the stability needs to be tested before making the solution.
3. After dilution, it should not be stored for a long time.
4. To ensure the safety, you should review our Material Safety Data Sheets before using this product under special conditions. .
Package & Storage:
Cardboard drum 25 kg, can be stored for 12 months under room temperature and hermetic condition without exposure to sunlight.
ATTENTION：
The above recommendations are based on comprehensive studies conducted inthe practical finishing. They are, however, without liability regarding property rights of third parties and foreign laws. The user should test whether the product and the
Application: are suited for his very special purposes.
We are, above all, not liable for fields and methods of Application: which have not been put down by us in writing.
Advice for marking regulations and protective measures can be taken from the respective safety data sheet.
